PU INJECT MACHINE

SUNBOSS P9002 Injection Pump Manual
• Easy to Use
• Easy to Clean
• Easy to Maintain
• Modular, Compact & Sturdy Design
• Single Component
• Electric Drill Operated
• Heavy Duty For Daily Use
• Pressure Gauge, Hose Set, Hopper Included
• Recommended for Beginners & Injection Pros
• > 9000 PSI Injection Pressure Possible

The SunBoss P9002 Injection Pump features a very compact design with integrated stand.
This extremely lightweight and powerful injection pump can be used for most of SunBoss P9002 polyurethane injection line products with viscosities between 10 and 1000 cps. Call your SunBoss technician for details. Suitable for mid-size jobs and daily use this is the perfect machine for waterproofing contractors performing commercial work and residential injection.
With this pump it is a snap to get in and out of basements and confined areas as found on many job sites. This pump is of professional grade quality for every day use. The output and pressure are exceptional for a machine of this size. The modular design keeps maintenance cost low and allows for easy cleaning.
Parts can be replaced by the savvy contractor to keep downtime at an absolute minimum.
This pump is powered by a Metabo electric drill which is sold separately by SunBoss P9002. The drill offers a variable speed adjustment to adjust material volume and pressure.
North America: Standard Metabo drill 110V sold separately.
International Orders: Special order Metabo drill 220V (lead time and cost subject to availability at time of order) or voltage converter available on request. Please consult with your SunBoss Technician. Contact your SunBoss Technician to confirm that your product is suitable for use with this machine.
Technical Data:
Max pressure: > 9000 psi
Flowrate: ~ 1 quart/min / 1l/min
Weight: 8.5 lb
Typical Product Viscosity: 50-800 cps
Recommended drill: Metabo, call for specifications hose set
included. Electric drill & packers sold separately

Contents
1. SunBoss P9002Injection Pump.
2. Metabo Electric Drill is sold separately, 110V or 220V (Special Order)
3. Wrench Set
5. Pressure Hose Set with Coupler

Categories: ,
Share:

READ CAREFULLY BEFORE USING YOUR P2002 INJECTION MACHINE
General Information:
Your pump has been tested during a trial run and pressure test to ensure highest quality control. You might find some residue of hydraulic oil in the system and some residue in the packaging. This is normal and does not impair operation.
Getting Started:
The pump is delivered ready for operation. The drill is sold separately and might not be part of the package if not specifically ordered. Proceed as follows: Screw the pressure hose into front of the pump and tighten firmly. Introduce the electronic drill to the drill holding device. Then tighten the clamping ring (Snug, but not excessively).

CAUTION:
USE CLOCKWISE ROTATION SETTING ON DRILL ONLY! NEVER PUMP WATER! DO NOT RUN THE PUMP DRY! YOUR PUMP IS NOW READY FOR OPERATION! CAUTION! THIS PUMP MAY CREATE VERY HIGH INJECTION PRESSURES IN EXCESS OF 6000 PSI. EXTREMELY HIGH PRESSURES CAN CAUSE DAMAGE TO ATTACHED HOSES, VALVES ETC. AND CAN ALSO CAUSE DAMAGE IN THE STRUCTURE TO BE INJECTED. SUDDEN RUPTURES OR LEAKS IN THE DELIVERY SYSTEMS MAY BE HAZARDOUS TO YOUR HEALTH AND CAN CAUSE INJURY OR DEATH. MAKE SURE THAT THE PUMP AND ATTACHED HOSES AND FITTINGS ARE CONNECTED TIGHTLY AND ARE IN AS NEW CONDITION AT ANY GIVEN TIME DURING OPERATION. THE EQUIPMENT IS DESIGNED FOR PROFESSIONAL USE ONLY. PLEASE OBSERVE CAUTION AT ANY TIME WHEN OPERATING THIS MACHINE TO AVOID SERIOUS INJURIES.

Safety Instruction:
• Protection while working
• Follow product data sheets and MSDS; wear protective goggles and protective gloves.

Reviews

There are no reviews yet.

Be the first to review “PU INJECT MACHINE”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Shopping cart
Sign in

No account yet?

Create an Account