Sikadur®-52 LP (IN) is two part, low viscosity, moisture
insensitive injection-liquid, based on high strength
As an injection resin with good adhesion to dry con-
crete, mortar, stone, steel and wood. Sikadur®-52
LP(IN) is used to fill and seal voids and cracks in struc-
tures such as bridges and other civil engineering build-
ings, industrial and residential buildings, e.g. columns,
beams, foundations, walls, floors and water retaining
structures. Sikadur®-52 LP(IN) is suitable for ASTM C
881, Type II and IV, Grade-1, Class E+F
Maximum width of cracks to be injected: 5 mm.
Sikadur®-52 LP (IN) is suitable for dry and moist condi-
Sound, clean, free from oil and grease and surface
Pre-treatment for good bond:
Concrete, mortar, stone should be thoroughly pre-
pared by high pressure water jetting or mechanical
means such as grinding, chiselling etc. Cracks must be
cleaned to remove dust with compressed air.
Part A : Part B = 0.8 : 0.2 (by weight)
Mixing Time :
Add all of part B to part A. Mix with an electric mixer at
slow speed (max. 250 rpm) for at least 3 minutes.
Avoid entraining air.
Add both parts in the correct proportion into a suit-
able clean, dry container and mix in the same way as
for the pre-batched units.
There are no reviews yet.